Is your Frigidaire refrigerator light bulb not working? It primarily means that the bulb is defective or there is no electricity in your refrigerator at all.
So, how can you fix the problem? By following some fixing procedures, you can back your refrigerator on track again.
Before going into the detail, you must confirm the following items-
- You must have an uninterrupted power supply in your home.
- You must have connected the power supply to the refrigerator from the wall electric outlet.
Frigidaire Refrigerator Light Bulb Not Working – Fixing Method
Here are the most probable causes and their effective solutions. Follow them one after one.
Replace Burned Out Light Bulb
You cannot deserve light from a burned-out light bulb. Firstly, bring out the bulb from the light socket and test it with a multimeter. No positive reading in the test means the bulb is burned out. So, you must purchase a new bulb.
Before purchasing a new one check your refrigerator’s model number and purchase accordingly. Otherwise, the bulb will not fit in the light socket. Lastly, place the bulb in the light socket properly. Now you are supposed to see the light inside the refrigerator.
Replace Faulty Light Assembly
Sometimes you may see that the bulb is showing a positive sign in multimeter test but light not appearing. In this case, you should disassemble the light assembly and test it with a multimer.
If it fails in the test, the main culprit is the light assembly. Some manufacturers do not sell the light assembly separately. So, you may need to purchase and replace the entire assembly to fix the light issue.
Replace Defective Door Switch
A Frigidaire refrigerator normally belongs a door switch that turns off the light insight the refrigerator when you close the door. If the door switch is defective, you will not see any light when the door is open.
To determine, disassemble the door switch, and apply a multimeter test. If test shows positive reading, the door switch is OK. Otherwise, it is liable for light problems. You need to replace it to fix the light problem.
Replace Faulty Light Socket
Light bulb is threaded into the light socket. It may be defective and causes light problem. So, test the socket with a multimeter and make sure it is getting power.
If the socket is getting power but the light bulb is not working, the light socket is defective. So, replacement of light socket will solve your problem.
Replace Defective Light Switch
A defective light switch prevents the bulb to light. So, check the light switch whether it is getting power or not. If it does not get power, replace it.
Replace Defective Light Board
There are some Frigidaire refrigerator models that use light board instead of a bulb. Light not working issue can be caused by a defective board. So, disassemble the board and test it with a multimer.
If the board is getting voltage but the light board is not working, it means the light board is defective. So, you should a simple replacement can fix the problem.
Where is the light bulb in a Frigidaire refrigerator?
The light bulb in a Frigidaire refrigerator is usually located at the top of the refrigerator compartment or in the freezer compartment. It may be covered by a plastic or glass lens that can be removed for bulb replacement.
Do you need a special light bulb for a Frigidaire refrigerator?
Yes, you may need a special light bulb for a Frigidaire refrigerator. Frigidaire recommends using their specific refrigerator light bulbs for optimal performance and safety. These bulbs can usually be found at home improvement or appliance stores, or purchased online.
What wattage is a Frigidaire refrigerator light bulb?
The wattage of a Frigidaire refrigerator light bulb depends on the model and age of the refrigerator. It’s important to refer to your owner’s manual or the label inside the refrigerator to determine the correct wattage for your specific model. Common wattages for Frigidaire refrigerator light bulbs range from 15-40 watts.
Why is my light not working in my Frigidaire refrigerator?
A burned-out light is the main culprit for not working light in your Frigidaire refrigerator. Also, faulty light assembly, defective door switch, faulty light socket, defective light switch, or defective light board can separately or combinedly may cause bulb light issue. So, replace the faulty component to fix your light problem.
How to remove Frigidaire refrigerator light bulb cover?
Follow the steps:
- Look for the screws of the bulb cover or lens in place.
- Unplug the screws and tabs on side of the bulb cover into the wall.
- Squeeze the sides of the bulb cover without causing any harm to the cover or other parts.
- Finally, free up the cover easily.
How do you change a light socket in a Frigidaire refrigerator?
Here is the detailed procedure. Just follow step by step-
- 1st Step: Disconnect your Frigidaire refrigerator from its power source
- 2nd Step: Unplug blub from the light socket
- 3rd Step: Remove the light socket
- 4th Step: Disconnect any electrical fitting
- 5th Step: Attach new socket
- 6th Step: Plug the bulb into the light socket again
- Final Step: Connect your refrigerator to the power source and switch it on.
Above mentioned reasons and solutions behind the Frigidaire Refrigerator light not working issues are not only practical but also recommended by the technician. With simple fixing knowledge, you can fix or replace any defective parts.
Just check one probable faulty part after one. Sometimes, one or more faulty parts work behind the problem. So, it is better not to stop when light does not appear after fixing a defective part.