The display on the Frigidaire gallery refrigerator is an essential part of the system. The touchscreen display serves multiple purposes. We can set and regulate the inside temperature of the refrigerator through it. With this display, we can also regulate the ice maker and water dispenser.
To fix Frigidaire gallery refrigerator display problems, you have to reset the refrigerator, detect the problem, and sometimes replace the display panel.
Let’s talk in-depth about the troubleshooting of the problems with the Frigidaire gallery refrigerator’s display.
Table of Contents
Frigidaire Gallery Refrigerator Display Problems
Frigidaire Gallery refrigerators come with an attractive touchscreen display. This glass panel allows the user to see the overall performance of the refrigerator. This display is also important for setting the temperature of the refrigerator. You can access the ice maker and the water dispenser using this display.
There can be some issues inside the control board or the panel itself, causing it to stop working. The problems could be:
- Frigidaire gallery refrigerator display dim
- Frigidaire gallery refrigerator display panel not working at all
- A Frigidaire gallery refrigerator display is not working after a power outage.
In this article, we’ll try to solve these issues.
Troubleshooting Frigidaire Gallery Refrigerator LED Display Problems
Once you’re done detecting what the problem is, it’s time to find the solutions. Unfortunately, any major problem with the display should indicate the need for a replacement. But, before we pay hundreds of dollars for this purpose, let us try some handy troubleshooting methods first.
Method 1: Turning Demo OFF
If the display is showing “OFF,” then you will have to turn the demo mode off. To leave the demo mode, you have to press the power saver button and the power freezer key together and hold them for at least 3 seconds.
In some models, these two buttons are not available. In that case, use the lighting buttons along with the power slide button.
Method 2: “88 88” Error
If your Frigidaire gallery refrigerator is showing an “88 88” error code or if the display is flashing, turn off your refrigerator and disconnect the plug. Leave it for about a minute and connect it again.
This should solve the problem by resetting the system.
Method 3: Disable Child Lock Mode
There is a feature called “child lock” in the Frigidaire gallery refrigerators. If this mode is enabled, the display panel will not function. Press and hold the Ice hold button for some seconds to turn off this mode.
Frigidaire Gallery Refrigerator Display Is Not Working Because Of The Control Board
Once you’ve checked everything you need to and haven’t found any problems, then it can be your main control board. Before replacing or repairing the control board, ensure that all the wire harnesses are tightly fixed in the appropriate positions.
The control board of the Frigidaire gallery refrigerator is located in the rear under a small panel. Try to detect which part of the control board is causing problems with the display.
Also check the other components of the refrigerator, including the display board and display panel.
How To Reset Your Frigidaire Gallery Refrigerator Display?
If your Frigidaire gallery refrigerator is not working, a reset will fix the problem in most cases. But if it doesn’t, then the problem is related to either a faulty display board or a faulty control board.
Resetting your refrigerator is quite an easy thing to do. There is no specific reset button on the refrigerators. You have to press and hold two buttons to reset your refrigerator. Those two buttons are “power freezer” and “power cool.” If you press them for three to five seconds, it will reset your refrigerator.
If you want to reset the light of your Frigidaire refrigerator water filter, you have to go to “Options”, after a click on ‘Water filter’ and finally click on “Set”. After that, you will need to select the next filter and your water filter light will reset.
If you fail to fix this issue by resetting your refrigerator, you may have to reset the control board. It’s also quite easy to do. Disconnect the plug from the electricity source and leave it for almost 5 minutes. Once you restart the refrigerator, the control panel will reset automatically.
Make Sure The Cables Are Properly Attached
Sometimes, any problem in the wiring leads to a malfunction. If your Frigidaire gallery refrigerator display is showing problems, check all the cables that connect the display with the rest of the refrigerator.
Also, make sure that the internal wiring is correctly attached. In particular, if your Frigidaire gallery refrigerator display is the problem, wiring is one of the most important things to check first. Any loose connection will disrupt the digital data transmission on the display panel.
Frigidaire Gallery Refrigerator Display Replacement
When you’ve done everything you could to fix the display panel of your Frigidaire refrigerator, but it’s not working anymore, there’s only one way left. To replace the display, follow the instructions below:
- Make sure the energy supplying cord is unplugged before replacing the display panel of your refrigerator.
- With a screwdriver, unscrew the two bolts attaching the bottom trim.
- Take out the screws which are attached to the posterior surface of the display panel.
- To remove the display, take it out of the case.
- Make a note of the cable attached to the display panel’s orientation before disconnecting it.
- Attach the cables to the relevant ports before installing the new display panel.
- Push the display panel inside its case and place the mounting tabs accordingly.
- To lock the bolts, twist them and tighten them.
- Reposition and tighten the bottom trim.
- Once you’re done, connect the plug again and start the refrigerator.
The replacement is certainly a costly one. A Frigidaire gallery refrigerator display panel costs around $140. Plus, you need to pay a professional repairman if you are unable to do it yourself.
Frequently Asked Questions
Q. What does a flashing 4 mean on a Frigidaire refrigerator?
Flashing 4 on a Frigidaire indicates a problem with the damper of your refrigerator, or the problem can be associated with the control board. If it occurs again, double-check the damper’s voltage to ensure it is 120 volts.
If you do, the problem is with your damper. If not, the problem is with the controller unit. If your damper and the reset are working properly, the mainboard is at fault. Look for other signs of a faulty control board.
Q. Why is my Frigidaire refrigerator flashing H1?
The error code H1 is displayed in a refrigerator when there is a problem with the sensor. If your refrigerator display is showing an H1 code, you have to diagnose the thermostat to see if the problem is there.
If you have checked the thermostat and found any defects, then you may have to replace it with a new one.
Q. How do you remove the error code on a Frigidaire refrigerator?
The error codes are a display of the underlying problems with the refrigerator. The algorithms are set in such a manner that whenever any internal problem is detected in the refrigerator, the system automatically displays an error code according to it.
To remove any error code from your refrigerator’s display, you need to determine why the code was shown. Solving the underlying problem will automatically remove the error code from the display.
Q. What does error code SY EF mean on a Frigidaire refrigerator?
The SY EF error code means that there is a problem with the evaporator fan of the refrigerator. Most often, the problem involves the motor of the evaporator fan of the Frigidaire refrigerator.
Sometimes excessive ice accumulation inside the evaporator fan stops its wings from whirling. Other problems include a loose door lock, a broken man motor, or any fault in the main control board.
Q. What does 5y CF mean on a Frigidaire refrigerator?
If your Frigidaire refrigerator is showing a 5y CF error code, it indicates that the refrigerator has a failure in communication while powering up. To repair this problem, you need to check the cables between the regulator board and the user interface.
It also indicates which part of the system is broken. Usually, this sign means that if your user interface or the controlling board is broken, you have to replace these parts.
Conclusion
The display panel of your refrigerator is an essential part of controlling many important tasks. Any problem with the display panel will cause a serious interruption to your refrigerator. You won’t be able to change the temperature of your refrigerator, nor the ice maker or water dispenser.
Frigidaire gallery refrigerator display problems are easy to fix if you can understand the assignment properly. Sometimes, if you’re unlucky, you may have to replace the display, which can cost you a hefty amount of money.
But most of the time, a simple reset is enough to solve this problem. So make sure that you’re trying everything you can before going for a display replacement.
Leave a Reply